Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7

Project BlueWater - The start

"Yvonnes PC" has been in a cheap/generic case for a long time, and as I'm bored I've decided to build a new case for it.
The name "BlueWater" comes from the fact that I'll be painting it Blue and it'll be water cooled and that BlueWater is a shopping center in England that Yvonne loves.

	This is the case That I plan to mod. The idea is to block off the front (where the door was), install 1 or 2 120mm fans in the front. A blue LCD display connected to a fan controller. The whole thing will be painted blue. The first thing to do is block off the front using a bent piece of perspex and plastic padding.
	Here's the front of the case after about 3 hours work. I heated up a piece of perspex to about 110°c then bent it around the front of the case. I then cut it to the correct size then glued it into place. I then covered the front with plastic padding then started sanding it down. It'll take several coats/sanding to get the front finished but it looks good already.

Next